Operation and Setting
Turn-on / Turn-off
Setting of Channel
1. Press “Power Switch”
key
(7)
for 1 second
to
turn
on
the
unit. The
LCD
window
will
show
“On”
first
and
then
show
channel
number
and
battery
life
indicator after 1
~
2
seconds. The LED Power Indicator will be light
on
in
blue
as
well
.
2. Under any situation, the unit can be turned off if pressing “Power Switch”
key
(7)
for
more
than
2
seconds.
After turning on the unit, the current channel
is
shown
on
the
LCD
window
.
Press “Frequency Set”
key
(3)
for
more
than
2
seconds
until the channel number
starts to blink, and then press “Up”
or
“Down”
key
(5)
to
select
the
channel
from
1-96.
Press
“Frequency Set”
key
(3)
again
to
confirm the setting of channel
number or it will return back to the original channel number after 10 seconds without
pressing any key.
HDC-702
The performance of signal transmission is highly involved with
battery energy. Batteries with 1600 mAh (or above) in capacity
are recommended. The optional charger HDC-702 is an economy
solution for you daily use.
CAUTION!!
Take out batteries when the devices won’t be operated in a long time.
DO NOT attempt to charge Alkaline battery. It will lead to battery
leakage or even explosion!
Frequency Pairing
1. After turning on the unit, the frequency pairing will be run automatically once.
2. The LED Power Indicator will be light on blinkingly in blue for three times and
then constantly while frequency pairing successfully.
3. Press “Frequency Set”
key
for
less
than
2
seconds
to
enable
frequency
pairing
function
again
.
If frequency pairing unsuccessfully after turning-on for 20 seconds,
it will back to the original channel number with LED Power Indicator light
on
in
blue
constantly
and
the original channel number remained
without
blinking
.
4. The distance for
frequency
pairing
should
be
less
than
3
meters
.
10
Notice: This function is available while only working with DR-501A.
Wireless Handheld Mic EJ-701TS+/EJ-701TM+
