-
13
-
5.2.3
Brightness
Adjusts individual camera Live View screen brightness.
1. Press [ENTER] button to start. Camera channel 1 is selected.
2. Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
level bar turns RED
3. Press [ENTER] button to change level from 1 to 5. Default level is 3.
5.2.4
Volume
Adjusts individual camera audio level.
1. Press [ENTER] button to start. Camera channel 1 is selected
2. Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
level bar turns RED
3. Press [ENTER] button to change level from 0 to 5. Default level is 3.
5.2.5
MD
Sensitivity(Motion
Detect
Sensitivity)
Adjusts individual camera’s Motion Detect Sensitivity level.
4. Press [ENTER] button to start. Camera channel 1 is selected
5. Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
level bar turns RED
6. Press [ENTER] button to change level from 1 to 5. Default level is 3.
5.2.6
MD
Area
(Motion
Detect
Area)
Select motion detection region. By default, the sensor will evaluate full screen pixels to calculate
potential movement.
To change motion detection area:
1. In “Camera Setting” menu, select “MD Area” and press [ENTER]
button
2. Use [UP / DOWN / LEFT / RIGHT] buttons to select target camera with
RED square frame
3. Use [UP / DOWN / LEFT / RIGHT] buttons to select region to be
disabled.
4. Selected area will change to WHITE square. All WHITE areas are IGNORED
during motion detection.
#
Not
implemented
in
demo
NVR
Press
[ENTER]
button
to
change
Press
[ENTER]
button
to
change
value
