9
10
Please follow instructions below. Failure may cause serious damage to the product and
Okamura will have no responsibility for any damages.
Instructions to Extend the Life of Product
Operating Precautions and Maintenance
Maintenance
●
This instruction manual is very important, so
store it in an easily accessible location.
●
Regular maintenance is recommended for
long-life use. Make your request to us early
for inspections and repairs (fees required)
when the warranty period has expired.
●
If the product has become unsteady due to
loosening of the bolts or screws during use,
retighten them immediately.
●
Avoid direct exposure to steam. Failure will
cause rust.
Mesh Part
●
Wipe off with a dry soft clean cloth.
●
Immediately wipe off any water or fingerprints
(sebum). Please note that the aluminum portion
will get oxidizedto lose its gloss and deteriorate
the texture if the chair is left with water or
fingerprints (sebum) attached.
●
Wipe off with a dry soft clean cloth.
●
Immediately wipe off any water.
●
Immediately wipe off any dust or fingerprints (sebum).
〈
Cautions
〉
●
Do not leave any water on the steel part. Do not
use a chemical cloth or an organic solvent such as
thinner and benzene. Please note that the product
with its color or texture deteriorated cannot be
restored to its original state.
Aluminum part
Steel part
●
Brush with a soft brush or tap the surface
softly and vacuum to remove dust to avoid
damaging the cloth.
●
When it gets dirty after extended period
of time, wipe with a well wrung soft cloth
moistened with thin neutral detergent. Wipe
clean with a damp cloth. Be sure to wipe
detergent completely and wipe again with a
dry cloth to dry it.
●
When using alkaline electrolyzed water to
remove stains, spray directly on the stain and
brush with a soft brush taking care not to
damage the cloth. Then, wipe the moisture and
stain to remove and wait for the cloth to dry.
●
When it gets an oily stain, dab and remove it by
using a dedicated stain remover immediately.
Then wipe with a soft cloth dampened with
water, followed by a dry cloth to dry. Stains may
be permanent depending on the material .
〈
Caution
〉
●
Remove stains as quickly as possible.
●
Avoid causing a circular stain, remove not only the
stain but also wipe off thoroughly around the stain.
●
Try the cleaner on inconspicuous area first since
the surface may discolor or deteriorate by using it.
●
Wipe the surface using a soft cloth moistened
with water or lukewarm water, and then, wipe
again with a dry cloth to dry it.
●
If dirt is noticed, immediately wipe it off with
a well wrung soft cloth moistened with thin
neutral detergent. Be sure to remove detergent
completely with a damp cloth and wipe again
with a dry cloth to dry it.
〈
Caution
〉
●
For the vinyl leather part, do not use an organic
solvent such as thinner and benzene, alcohol,
sodium hypochlorite, hypochlorous acid water, a
chemical cloth or a shoe cleaner. The vinyl leather
part with its color or texture deteriorated cannot be
restored to its original state.
Vinyl leather part
●
Wipe with a well wrung soft cloth moistened.
●
If dirt is noticeable, wipe it off with a well wrung soft
cloth moistened with thin neutral detergent. Be sure
to remove detergent completely with a damp cloth
and wipe again with a dry cloth to dry it.
Resin Part