9
10
Materials and Surface Finish
Please follow instructions below. Failure may cause serious damage to the product and
Okamura will have no responsibility for any damages.
Operating Precautions and Maintenance
For daily care
Instructions to Extend the Life of Product
■
Shelf Unit
Part
Materials
Surface Finish
Structure
Flame
Steel
Amino-alkyd resin
coating or polyester coating
Wiring Cap
polypropylene
－
Wooden
worktop
Core material
MDF(Medium Density
Fiberboard)
－
Surface materials
Melamine resin
－
Coaming
PVC(Polyvinyl
chloride)
－
Steel
worktop
Body
Steel
Amino-alkyd resin
coating or polyester coating
Back panerl
(Option)
Surface materials
Polyester
－
Core material
Plywood, MDF
－
取付金具
Steel
Amino-alkyd resin
coating or polyester coating
■
Gate , Plant box , End panel
Part
Materials
Surface Finish
Structure Body
Steel
Amino-alkyd resin
coating or polyester coating
＊
Please understand that product specifications might change without prior notification due to
improvements made
to the product.
●
Avoid direct exposure to steam. Failure will
cause rust.
●
Wipe off any water on the product with a
dry and soft cloth.
●
Immediately wipe off tea, coffee, detergent,
chemical, etc. if any spilled.
●
This instruction manual is very important, so
store it in an easily accessible location.
●
Regular maintenance is recommended for
long-life use. Make your request to us early
for inspections and repairs (fees required)
when the warranty period has expired.
●
If the product has become unsteady due to
loosening of the bolts or screws during use,
retighten them immediately.
●
Do not use any sharp
‐
edged objects such
as a knife on the worktop. Failure may
damage the worktop.
●
Wipe off with a dry soft clean cloth.
●
If dirt is noticeable, wipe it off with a well wrung soft
cloth moistened with thin neutral detergent. Be sure
to remove detergent completely with a damp cloth
and wipe again with a dry cloth to dry it.
〈
Caution
〉
●
Do not leave any water on the worktop. Do not use a
chemical cloth or an organic solvent such as thinner
and benzene. Please note that the product with its
color or texture deteriorated cannot be restored to
its original state.
●
Wipe with a well wrung soft cloth moistened.
●
If dirt is noticeable, wipe it off with a well wrung
soft cloth moistened with thin neutral detergent.
Be sure to remove detergent completely with a
damp cloth and wipe again with a dry cloth to
dry it.
Steel part , Worktop
Resin part