Changing the Desk Height
Before Assembly
Removing the Desktop Shelf
For the remounting procedure, see steps 6 to 10 on the previous page.
Removing the Inner Panel
Before assembling the desk, first remove all items on the desktop panel and desktop shelf.
Next, check page 3, and determine what shape (height) will be set.
Desktop shelf
rear panel
Connecting bolt
Right outer panel
Right inner panel
Ring
Connecting bolt
Be sure always perform disassembly or assembly using two or more people.
Also, be careful that you do not lose any sections or parts.
Fitting the 3-drawer Wagon Unit
When Removing a Drawer
If the desktop panel is a height of JIS2 or JIS3, then the top drawer unit of the
desk wagon must be separated. The separated unit can be mounted to the rear
as shown in the figure.
To remove a drawer, remove the
screws from the inside of the drawer
frame panel, and then pull out the
drawer in the forward direction.
Drawer unit
Screws
*For the assembly
procedure, see the
instructions for the
desk wagon.
Flip over the desk, and remove the connecting bolts and
rings from the right and left side panels of the desk.
Remove the inner panel, and remount the inner panel to
the new height.
Left outer panel
Left inner panel
Remove the connecting bolts from
the desktop shelf rear panel, and
remove the desktop shelf from the
desk.