Desk
Point
(Note about connection bolts)
Parts list
(Make sure to check the information below before you start assembling.)
Attach connection bolt
Connecting bolt
Single-end
connection bolt
Bag hook
Paper measure
Desktop
Left outer panel
Left inner panel
Right inner panel
Rear panel
Right outer panel
Left outer panel
Right outer panel
Shelf bottom support panel
Rear panel
Organizer
tray
Actual size
Ring
● Use a cross-head screwdriver for assembly.
● Assemble the desk on a protective sheet or other object to
prevent scratches to the product. A protective sheet is not
included with this product.
* Do not use an electric screwdriver or power tools, as they may
damage the desk. Use a manual screwdriver instead.
Attach a single-end connection bolt to each
of the four holes in the left and right outer
panels, and to the two holes in the rear panel.
Point
Screw-type connector
Screw-type connector
Arrow
Single-end connection bolt
Turn clockwise to tighten.
Turn counter-clockwise to loosen.
(Embedded in various parts)
(Note about screw-type connectors)
When the arrow is aligned
with the connecting bolt, it
can be inserted (or
removed).
Take care not to over
tighten the connection
bolt when screwing it
into the insert nut.
Doing so may cause the
insert nut to come loose, or
it may damage the head of
the connection bolt.
Single-end
connection bolt
Desktop shelf
Connecting bolt
Actual size