2
3
Locations of Caution Seals
(Attached to the desktop
back side and fixed shelf
plate back side)
(Attached to the shelf plate back face.)
(Do not remove the warning labels)
To Use Safely
This indicates that improper handling due to disregard of this warning may result in injury or
damage to property.
Fully read the instruction manual before assembly, securely tighten the bolts
with a screwdriver, and use all of the assembly parts without leaving any
parts unused to assemble correctly.
When assembling, do not use an electric screwdriver. When any force more
than necessary is applied, the product may be broken or the bolt may not be
removed.
After assembling, fully tighten the product on a flat
surface, and make sure that each part is securely
installed.
This product uses natural wood.
Each product will have a slightly different appear-
ance and may differ in wood grain and color from
the catalog and sample products.
There may be some parts and members which are not
used depending on the assembling pattern. Store them in
a safe place as these parts will always be necessary
when re-combining. Purchase parts again when they are
lost.
Immediately after purchase, this product may emit
adhesive or paint odors. In such a case, sufficiently
ventilate and aerate. Periodically allow for ventilation.
When installing and moving this product, make sure two
persons carry the product without dragging it.
(Dragging the product may result in damage to floors.)
When the product is installed in a high humidity location, mold, etc., may grow.
Periodically allow for ventilation.
CAUTION
CAUTION
CAUTION
Cautions for assembly
Do not handle this product roughly or use for any other purpose than speci-
fied. Never apply body weight to any point on the product, or ride on it. It
may result in turnover or breakage, and is extremely dangerous.
Cautions for handling
Select a horizontal and stable location for installation. Use in a location
where the floor is inclined or unstable may result in turnover or an accident,
and is dangerous.
Avoid using this product in a location subject to direct sunlight, high
temperatures or high humidity or in a location subject to direct heat and
wind from a heating stove or air conditioner. It may result in alteration,
deformation or discoloration.
Do not place any hot object directly on the product.
It may result in alteration, deformation or discoloration.
Do not rub the product with hard material, and do not
write with a writing instrument such as a ball-point
pen with a hard tip without using a desk mat.
It may result in deformation or flaws.
Periodically inspect for looseness of the bolts and
connecting parts of the members, and securely
re-tighten them when there is any looseness.
Use while there is looseness may result in risks of
deformation, breakage and turnover.
Do not allow the product to become wet and remain wet and do not leave a
wet cloth on the product. It may result in deformation, cracks, swelling,
stains or corrosion of the surface material. When the surface becomes wet,
immediately wipe so that no moisture is left.
Do not attach any seals or cellophane tape, etc., to the product.
It may result in removal of the surface material.
Cautions for installation
To ensure long-term use
Make sure to wipe with a dry and soft cloth along the wood grain. Use with
a wet cloth may result in cracks and swelling. When the product is very
dirty, moisten a soft cloth with a diluted neutral agent (dishwashing soap),
and tightly squeeze it to wipe away dirt completely. And then, wipe with a
soft dry cloth so that no soapy residue remains. When a large amount of
moisture remains, deformation and discoloration may result.
Natural wood is natural material, therefore, the material will have its own unique grain and color. In other words, each product may differ slightly in color
due to the characteristics of natural wood. In addition, natural wood is a material which breathes. Therefore, warpage or distortion may occur depending
on use environment. These features give natural wood its attractive quality. The longer the product is used, the greater these features will be enhanced.
* Natural wood means solid wood, back piece, laminated wood and sliced veneer, etc.
Do not use alcohol-based or thinner-based
solvent/chemical waste cloth or commercial cleaner
since it will damage the surface. It may result in
discoloration, etc.
About care
Characteristics of
natural woods
Make sure to only place an object on the product within the maximum loading mass. Placing an object on
the product heavier than the maximum loading mass may result in turnover or breakage, and is
extremely dangerous.
Desktop maximum loading mass = 40kg
(Uniformly distributed mass)
* Uniformly distributed mass means placing a mass uniformly on the desktop and shelf plate.
Diluted
solvent
Alcohol-based
solvent
Neutral a
gent
(dishwashing soa
p)
Memo
Seal
Assembly
Instruction
Manual
Check before assembling
Desktop Height, Chair Height/Depth
OKAMURA Study DESK series complies with JIS Standard No. 2 (body height 120cm) through
No. 6 (body height 180cm). The desktop height is five-stage adjustable.
The following diagram shows bolt installation positions at the time of assembly according to
each JIS No. In addition, height and depth of a chair sold separately is five-stage adjustable.
Use at a proper height suitable for body height of your child.
<JIS standard No. and installation screw positions of
desk (desktop) and chair (backrest/seating face)>
<Backrest>
No.6
No.5
No.4
No.3
No.2
No.6
No.5
No.4
No.3
No.2
No.6
No.5
No.4
No.3
No.2
<Seating face>
* This table shows standard reference dimensions. Make certain to determine
the height and the depth of the desk and the chair according to the body
height and the body size of your child.
Check before assembling
Draw a circle around the No. applicable
to the body height of your child to determine the height of the desktop.
<JIS standard No. and reference of desk and chair height and depth>
JIS standard No.
Standard body height (cm)
Desk
Chair
Desktop height (cm)
Seating face height (cm)
Seating face depth (cm)
No. 2
No. 3
No. 4
No. 5
No. 6
<JIS standard No. and body height reference>
No. 6
No. 5
No. 4
No. 3
No. 2
Quality labeling seal
(Attached to the desktop back side)
Warning label
注意
Upper side
Assembled on rear face