![OK. OWM 16222 A3 Скачать руководство пользователя страница 21](http://html.mh-extra.com/html/ok/owm-16222-a3/owm-16222-a3_user-manual_727744021.webp)
21
EN
Fig.
12
Inlet filter
Caution!
•
Close the water supply!
•
After cleaning, always make sure that the water hose is properly installed and no water
leaks.
Filter at the tap
Clean the filter if there is an insufficient flow of water when the water tap is open.
•
Unscrew the supply hose from the water tap.
•
Wash the inlet filter under running water.
•
Reconnect the supply hose.
Supply filter at the washing machine
Clean the filter regularly, approximately every three months.
•
Unscrew the supply hose on the back of the unit.
•
Clean the filter with a small brush.
•
Reconnect the supply hose.
ERROR CODES
Problem Cause
Solution
Err1
•
Lock - error
•
Shut the door properly
Err2
•
Drainage error, water is not fully
drained within 6 minutes
•
Clean pump filter
•
Check drain hose installation
Err3
•
Temperature sensor error
•
Contact the After sales service
Err4
•
Heating error
(Appears at the end of a cycle)
•
Contact the After sales service
Err5
•
Water level not reached after 8
minutes.
•
Drain hose is self-syphoning.
•
Make sure that tap is fully opened and water
pressure is normal
•
Check drain hose installation
Err7
•
Motor - error
•
Contact the After sales service
Err8
•
Water protective level - error
•
Contact the After sales service
Unb
•
Unbalanced load - error
•
Check and balance laundry load in the drum
•
Reduce the load
PAUS
•
Modus after power interruption
•
When power is reconnected, press the
Start/
Pause
button for program to continue
IM_OWM16222A3_170811_V06_HR.indb 21
11/8/17 4:17 pm