05
Picture
Picture mode
Choose the desired picture mode (Standard, Mild, User, Dynamic) using the arrow buttons LEFT (13)(29) and RIGHT (10)
(35). Choose User picture mode if you want to set the values for contrast, brightness, colour and sharpness yourself.
Use the arrow buttons to do this.
Colour temperature
Choose the desired colour temperature (Medium, Warm, User, Cold) using the arrow buttons LEFT (13)(29) and RIGHT
(10)(35). Choose the User colour temperature if you want to set the values for red, green and blue yourself. Use the
arrow buttons to do this.
Aspect ratio
Choose the desired aspect ratio (16:9, 4:3, PointToPoint) with the arrow buttons UP (15)(34) and DOWN (11)(36).
Noise reduction
Choose the desired noise reduction (Off, Low, Middle, High, Default) using arrow buttons UP (15)(34) and DOWN (11)
(36).
PC setting
Choose the desired position of the picture format using arrow buttons UP (15)(34) and DOWN (11)(36). You can adjust
the vertical and horizontal position from 0 to 100. Use the arrow buttons to do this.
Adjust the size of the screen using arrow buttons LEFT (13)(29) and RIGHT (10)(35). You can adjust the size from 0 to
100.
Sound
Sound mode
Choose the desired sound mode (Standard, Music, Movie, Sports, User) using arrow buttons LEFT (13)(29) and RIGHT
(10)(35). Choose User sound mode if you want to set the values for treble and bass yourself. Use the arrow buttons to
do this.
Balance
Choose the desired balance between the left and right loudspeakers. You can adjust the balance from -50 to +50. Use
the arrow buttons to do this.
Surround sound
Choose the desired Surround sound (Off, Surround, SRS TruSurround XT) using arrow buttons UP (15)(34) and DOWN
(11)(36).
Equalizer
Choose the desired value (0 - 100) per frequency band (120 Hz, 500 Hz, 1.5 kHz, 5 kHz, 10 kHz) using arrow buttons
UP (15)(34) and DOWN (11)(36).
Channel entry
Software update
You can update the software using a USB storage device. Use the arrow buttons to navigate and confirm with ENTER
(12)(30).
Options
Language settings
Select the desired menu language with the arrow buttons.
Default settings
Press ENTER (12)(30) and confirm with the arrow button LEFT (13)(29) to return the projector to its factory settings.
Cancel using arrow button RIGHT (10)(35).
Rotate
Press ENTER (12)(30) to change the orientation of the projected picture between Rotation settings (0, 1, 2, 3).
Blending
Press ENTER (12)(30) to change the clarity of the menu (Off, Low, Middle, High).
5.4 Connecting headphones or speakers
•
Use an audio cable with a 3.5 mm jack to connect headphones or speakers to the audio output (19) of the projector.
5.5 Placing the batteries in the remote control
1
Improper installation of batteries can result in leaks and corrosion to the battery and damage to the device.
Corrosion, oxidation, battery leaks and other gradual defects will invalidate the warranty.
4
Remove the battery cover.
5
Insert the AAA batteries matching the (+) and (-) polarity markings.
6
Re-install the battery cover.
6. OPERATION
Switch the projector on with the ON/OFF button (7)(32).
6.1 Selecting an input source
•
Press INPUT (9)(38).
•
Select the desired input source (AV, VGA, HDMI, USB) with the LEFT (13) (29) and RIGHT (10)(35) arrow buttons.
•
Confirm by pressing ENTER (12) (30).
5
NO SIGNAL will appear at the top left if no input source could be found. Check the input source and cables.
6.2 Opening or playing a multimedia file
•
Insert a USB storage device containing the multimedia file into the appropriate input (21)(22).
•
Check at the top left of the screen to verify that the correct input source has been selected. If not, select the correct
input source (USB).
•
Choose from Photo, Music, Movie, or E-BOOK.
•
Select a folder using the arrow buttons LEFT (13)(29) and RIGHT (10)(35).
•
Select the folder with the multimedia file and press ENTER (12)(30).
•
Select the multimedia file. A preview and properties of the selected file will appear after a few seconds.
•
Press ENTER (12)(30) to play.
•
If you have played this file earlier, you will see the message “Do you want to resume play: Yes/No?” Select Yes and
press ENTER (12)(30) to resume where you left off. Select No and press ENTER (12)(30) to play from the beginning.
6.3 During playback
•
To lower the volume, press the VOLUME DOWN button (28) on the remote control or the LEFT button (13) on the
projector.
•
To increase the volume, press the VOLUME UP button (37) on the remote control or the RIGHT button (10) on the
projector.
•
Press PLAY/PAUSE (26) on the remote control to pause play. Press again to continue playing.
•
Press ENTER (12)(30) to open the playback menu.
•
Select a playback action and press ENTER (12)(30) to confirm. The available playback actions vary by media type.
6.4 The settings menu
To open the settings menu, press MENU (14)(27). Use arrow buttons LEFT (13)(29) and RIGHT (10)(35) to navigate
between Picture, Sound, Options and Channel entry.
Select a menu item using arrow buttons UP (15)(34) and DOWN (11)(36). Press ENTER (12)(30) to open a menu item.
To go a step back, press MENU (14)(27). Press BACK (8)(33) to close the settings menu.