03
17. Remote control window
18. Pivoting mount
19. Audio output
20. AV video output
21. USB slot
22. USB slot
23. HDMI input
24. HDMI input
25. VGA input
4. FUNCTIONS
Projector
2
Main components
CAUTION
1
Improper installation of batteries can result in leaks and corrosion to the battery and damage to the device.
Corrosion, oxidation, battery leaks and other gradual defects will invalidate the warranty.
1
If you do not use the appliance for an extended period, remove the batteries.
1
Do not put the appliance near a heat source. This could damage the appliance.
1
Put the appliance on a horizontal flat surface.
1
Keep minimum (50 mm) space around the appliance for optimal ventilation.
Remarks
5
If this appliance is equipped with rubber feet to prevent it from moving: The feet are made from non-migrating
material specially formulated to avoid leaving any marks or stains on furniture. However, certain types of furniture
polishes, wood preservatives or cleaning sprays cause the rubber to soften and leave marks or a residue on
the furniture, and potentially risk the surface to become damaged. To prevent damage to wooden surfaces, we
recommend that you apply self-adhesive pads to the bottom of the rubber feet before installation.
5
We recommend that you retain the original carton and packaging materials in case it ever becomes necessary
to return your product for service. This is the only way to safely protect the product against damage in transit.
If you do dispose of the carton and the packaging materials, please remember to recycle with due care to the
environment.
3. PREPARATIONS FOR USE
3.1 Unpacking
•
Unpack the appliance carefully.
•
Check the package contents as described below. If any item is missing, please contact your reseller.
5
We recommend that you retain the original carton and packaging materials in case it ever becomes necessary
to return your product for service. This is the only way to safely protect the product against damage in transit.
If you do dispose of the carton and the packaging materials, please remember to recycle with due care to the
environment.
3.2 Package contents
5
If any item is missing, please contact your reseller.
1
The following items are included in the received package:
•
1x Projector
•
1x Remote control
•
1x Mains cable
•
Lens cap
•
VGA cable
•
AV video cable
•
User manual
•
Cleaning cloth
Remote control
3
Remote control buttons
26. PLAY/PAUSE button
27. MENU button
28. VOLUME DOWN button
29. LEFT arrow button
30. ENTER button
31. ROTATE button
32. ON/OFF button
33. BACK button
34. UP arrow button
35. RIGHT arrow button
36. DOWN arrow button
37. VOLUME UP button
38. INPUT button
5. INSTALLATION
5.1 Picture size and projection distance
The following picture sizes can be achieved with the following projection distances (distance between the projector and
the wall):
•
45.7 inch: 35 inch (1.16 m: 89 cm)
•
59.1 inch: 46 inch (1.50 m: 117 cm)
•
70.9 inch: 58 inch (1.80 m: 147 cm)
•
78.7 inch: 64 inch (2.00 m: 163 cm)
•
98.4 inch: 81 inch (2.50 m: 206 cm)
•
118.1 inch: 100 inch (3.00 m: 254 cm)
•
140.2 inch: 120 inch (3.56 m: 305 cm)
•
157.5 inch: 134 inch (4.00 m: 340 cm)
•
187.8 inch: 160 inch (4.77 m: 406 cm)
5.2 Positioning and adjustment
•
Place the projector on a solid, horizontal surface.
•
If necessary, tilt the mount (18) to set the projector at an angle.
•
Remove the lens cap.
•
Direct the projector onto a white wall using the lens. Bear in mind the distance required to the wall in relation to the
picture size that you wish to achieve, see the previous paragraph.
•
Connect the plug on the mains cable to the power input (1) on the projector.
•
Connect the mains plug to a wall socket.
•
Switch on the power using master power switch (2).
•
Press ON/OFF (7)(32) to switch the projector on. The projector will warm up and project the menu onto the wall.
•
Use the focus ring (4) to adjust the sharpness of the picture.
•
Use the keystone correction ring (3) to correct the picture if it takes on a vertical trapezium shape.
5.3 Connecting a playback device
HDMI connection
•
Use an HDMI cable to connect the HDMI output of a device (e.g. a computer, DVD player or media player) to the
HDMI input on the projector (23)(24).
VGA connection
•
Use the VGA cable supplied to connect the VGA output of a computer or laptop to the VGA input of the projector
(25).
AV video connection
•
Use the supplied AV video cable to connect the AV video output of a video device to the AV video input on the
projector (20).