8
DE
Ersteinrichtung
Ersteinrichtung
Allgemeiner Betrieb
1.
Verbinden Sie ein Ende des HF-
Koaxialkabels mit der Antennenbuchse an
der Wand und das andere Ende des Kabels
&]>^_`{|
Ihres Fernsehers.
2.
Schließen Sie das Netzkabel an die
Steckdose an, nachdem Sie alle
Verbindungen hergestellt haben.
3.
Mit Netzkabelstecker an Netzsteckdose
und Fernseher verbunden im
„Standby“
-Modus. Die rote LED-Anzeige leuchtet an
der Vorderseite des Fernsehers auf.
4.
Drücken Sie im Standby-Modus die Taste „ “
an der Seite des Fernsehers oder die Taste
auf der Fernbedienung, um den Fernseher
einzuschalten. Die rote LED-Anzeige wird
blau.
5.
Wenn Sie den Fernseher zum ersten
Mal einschalten, wird zeigt er direkt das
Automatische Installationsmenü
an.
= +*
Menü zu navigieren und die Einstellungen zu
ändern.
Beim ersten Einschalten müssen Sie das Land
auswählen:
Wählen Sie dann die Sprache aus:
Wählen Sie dann die automatischen
Leistungsstunden aus:
Wählen Sie dann die Methode der Fernseh-
Verbindung aus:
Dann können Sie Tune Type auswählen:
Drücken Sie die Taste
SOURCE
auf der
Fernbedienung und wählen Sie DTV, um den
Fernseher auf digitale terrestrische Ausstrahlung
umzustellen.
Informationsbanner
Wenn Sie den Sender mit den CH /CH
-Tasten oder den Zifferntasten wechseln, zeigt der
Fernseher das übertragene Bild zusammen mit
einem Informationsbanner auf dem Bildschirm an
(nur im DTV / ATV-Modus verfügbar).
Das Informationsbanner kann jederzeit während
des Fernsehens durch Drücken der
DISPLAY
-
Taste auf der Fernbedienung angezeigt werden.
Erste Schritte
Содержание ODL 19640H-SB
Страница 98: ...ODL 19640H SB 20190312v2 90101 15731 ...