9
6. TIPSAVER
WORKSTAND
OVERVIEW
a.
TipSaver Workstand Features
b. Adjustable Angle Cradle Guide*
Workstand Cradle Description
MX-W1AV MX-W1CR TipSaver
cradle,
Advanced hand-piece, includes knobs
MX-W1AV MX-W1CR TipSaver
cradle,
UltraFine hand-piece, includes knobs
MX-W4PT MX-W4CR TipSaver
cradle,
MX-PTZ hand-piece, includes knobs
MX-W5DS MX-W5CR TipSaver
cradle, MX-DS1, includes knobs
c. TipSaver Workstand Configurations
The TipSaver Workstand is designed to accommodate different configurations
in a minimal footprint. To change the configuration;
1.
Remove the two screws from the underside of the workstand base (MX-WB).
2.
Move the Workstand Sponge Holder (MX-WSH) into the desired position.
3.
Replace the two screws into the underside of the workstand base.
d. Cradle Positioning
The TipSaver Workstand incorporates an adjustable angle cradle allowing the
insertion angle for the hand-piece to be adjusted for the comfort of the operator.
To adjust the angle of the cradle;
1.
Loosen the knobs counterclockwise.
2. Adjust the cradle to the desired
angle.
3.
Tighten the knobs clockwise.
Workstand Sponge Holder
(MX-WSH)
Workstand Base (MX-WB)
Adjustable Angle Cradle*
Adjustment Knobs
Coiled Brass Cleaner or Coiled Brass Cleaner with Sponge
