1.
push both hooks entirely into the OBD
socket jack
2.
turn the hooks towards the OBD
socket jack and make shure that they
are centrical*.
Pull the hooks into the holes of the
OBD socket jack
3.
push the brackets under the hooks
•
put the upper lock part onto the mounted
lower part
(works in both directions)
• mount both allen screws (2x) M3 and turn them on hand-tight
• close the OBD lock and remove the key
dismounting: in reverse sequence. Please note that the hooks have to point in the notch
direction!
Your car is OBD secured
*
Turning the hooks should be possible without great drag. For the first time of installation u might want to use a small pair of tongs for
support (use extreme caution!). Please make sure that no cable on the back is broken during this process. We assume no liability for any
kind of damage!
Содержание OBD-Saver VAG
Страница 4: ...Assembly sequence VAG...
