Ojmar OTS ADVANCE, Быстрое руководство

Страница: 7 / 30

OJMAR
5
1. OTS LOCKS
1.1.
TYPES OF KEY
There is a total of 15 types of different keys. 7 of them are mostly used.
1.1.1.
Dedicated Key
This can only be used in a Dedicated Lock that has been programmed with the same
number as the key.
1.1.2.
Free Key
This can be used in any free lock that is not in use.
It can be configured to use up to 3 locks of the same type.
•
EXAMPLE: A member with one key programmed for 3 locks can use up to 3 lockers at the
same time.
1.1.3.
Multifunction Key
A dedicated lock and up to three free locks not in use can be used.
1.1.4.
Master Key
This is used to open any type of lock in the same system. You can only open the lock. Lock
will not be occupied once the master key opens it.
•
EXAMPLE: If lock no. 1 is closed by a user card and we use the master key on lock no. 1,
the locker will open keeping the lock released. The user that is using locker no. 1 shall not
be able to operate on another lock. They must contact the maintenance staff so that they
can format their user key. Any other user may use locker no.1.
•
NOTE: This user, in particular, with their key may only operate on this lock number 1.
1.1.5.
Service Key
They are used to open and close any type of lock in the same system without modifying the
status of the lock. Lock will stay occupied if it was before.
•
EXAMPLE: If we use the service lock to open a lock closed by a user, the lock shall remain
open but internally it will continue being used by the user key that closed it originally. In
this way, only the user key that closed it originally and the service key can close this lock.
IT IS UNADVISABLE TO USE THE SERVICE KEY TO LEAVE THE LOCKS OPEN.
•
EXAMPLE: If we use the service key to open and close a lock closed by a user key, the
lock shall remain in that state, with it only being able to be opened by the same user key
that closed it originally.
1.1.6.
Reset Key
This key deletes all the configuration from the lock and resets it to its factory
configuration. Therefore, a set-up key must be used to restart it.
1.1.7.
Test Key
This key allows a lock to be opened and closed when it is factory configured.