PAGE 12
© 2019 OJ Electronics A/S
ADJ: Adjust
This option allows you to calibrate the measured room
temperature
You should calibrate the sensor if the temperature reading
differs from the actual temperature
The measured temperature must be entered
Note that with sensor application
F
, the temperature is
measured in the floor, this temperature would be higher
than the ambient temperature
Adjust is not applicable if the sensor application is set to
C
You can calibrate the sensor with +/- 10°C in steps of
0 1°C in the following way:
• Access the menu
• Scroll through the menu until you come to ADJ
• Press the middle button
• Use the top and bottom buttons to adjust the sensor
with the value with which you want to increase/de-
crease the temperature
• Confirm your choice with the middle button
Menu structure:
AdJ:
Measured tempe/- 10°C
(Options available may vary depending on version)
