![background image](http://html1.mh-extra.com/html/oilon/gp-6-10-p/gp-6-10-p_operating-and-maintenance-instruction-manual_3568677010.webp)
7
40180036GB
4. Burner
Installation
4.1. Burner
Mounting
The furnace which has a flame-shaped design does not require refractory. Boilers without
bottom cooling require refractory to prevent heat from reaching boiler foundations.
The flame must at no point come into contact with the furnace walls. If this cannot be avoided,
such points must be covered with refractory. This applies especially to the refractory at the back
wall of short furnaces.
1
Mounting plate
2
Gasket plate
3
Thermal insulation
Burner
Æ
D2
R1
GP-6.10 P
100
70 - 74
GP-6.20 P
105
70 - 74
The mounting plate must have 2 or 4 pcs M10 threaded holes for the mounting of the burner
according to the drawing.
4.2. Hinged Burner Housing
On standard version the burner can be hinged to the left.
4.3. Electric
Connections
The burner must be connected according to the electrical diagrams delivered together with the
burner. General and local standards and regulations as well as requirements of electrical
equipment on electrical connections must be adhered to.
Содержание GP-6.10 P
Страница 2: ......
Страница 8: ...5 40180036GB 3 2 Basic Assembly Drawing...