Installation and User ’s Guide
Installation and User ’s Guide
http://www.orionimages.com
http://www.orionimages.com
14
15
Pixel-to-Pixel
Setting: On, Off
Default: Off
Shows the original picture with 1:1 pixel mapping, if the picture is larger than the monitor’s LCD
resolution, the center part of the picture is shown. BRI / M / SEL knob operation you can see part of
the picture is not completely display.
Center Marker
Settings: On, Off
Default: Off
Set to display center marker or not.
Language
Settings: English, Chinese
Default: English
Set English / Chinese switch.
Screen Markers
Settings: Off, 95%, 93%, 90%, 88%, 85%, 80%
Default: Off
The box -shaped mark display on or off can be set in accordance with the desired ratio.
Camera
Settings: 480P, 1080I
Default: 480P
For 480P screen pixel DSLR camera, such as Canon 5D II camera
For 1080I screen pixel DSLR camera, such as Canon 5D III camera
H/V delay
Settings: Off, H&V delay, V delay, H delay.
Default: Off
H/V Delay allows you to check the outside signal of active picture area. This mode is for
broadcast professionals.
Underscan
Settings: On, Off
Default: Off
HDMI monitor can not display the best resolution pixel-to-pixel mode , the output resolution is smaller
than the display resolution , the display will appear black side of this situation is called HDMI underscan;
Conversely , the display You can not display the entire contents of the image that HDMI overscan.
Underscan / overscan principle each pixel point average tensile or compression so that the image can
be completely displayed on the screen.
