IC-FAC2
K
10
Troubleshooting
Before making repairs, please read the following content carefully to fix common problems.
Not running, but
dust sensor is on
.Running, but dust
sensor is off
Problems that could not be solved
Please contact the dealer of purchase or Iris Ohyama Europe B.V. Customer Service Center.
IRIS OHYAMA EUROPE Customer Service E-mail
[email protected]
Warning
Do not disassemble, repair or modify the product yourself. Any other
servicing should be performed by an authorized service representative.
Status
Possible cause
Remendy
Low Suction
●
Please clean or replace filter, and empty
contents from the dust cup.
●
Significantly lower suction.
●
Sensor is coated in dust.
●
Please clean sensor (P8)
Stop operating
●
Filter is clogged.
●
Dust cup is clogged.
●
Filter is clogged, automatically turning
power to LOW to prevent overheating.
※
Depending on the operation mode,
the humidity of the room, and the
environment, the operation light may
flash and decrease the power.
●
Please clean or replace.
●
Please remove dust.
●
“Protection mode” has been activated
to prevent overheating.
●
Follow the “protection mode” instructions
carefully.
●
Plug is not inserted into the outlet
correctly.
●
Reinsert the plug and press the menu button.
(P5)
Hot air not heating
●
Room temperature is too low.
●
Use in cooler rooms or use on LOW may take
longer to produce hot air.
Abnormal
operation light,
low suction
Abnormal heating
●
Please clean or replace.
●
Please remove dust.
