
113
EN
HET 4530 COLOR
INCONVENIENCES AND POSSIBLE SOLUTIONS
Before performing cleaning operations,
ALWAYS disconnect the plug from the mains
power and wait for the appliance to be
completely cooled.
- Use a delicate detergent for the general cleaning.
- Clean the ventilation holes with a cloth or with a feather duster.
- Never use abrasive detergents or materials or “aggressive” cleansers.
- The glass (2) must be cleaned carefully using a moistened soft cloth.
-
DO NOT use glass cleaners.
NEVER immerse the appliance in water or in other liquids.
The appliance doesn’t use a standard lamp for the flame effect; it uses an electronically
controlled LED system to create the effect. For this reason, there are no parts which can
be replaced or repaired by the user.
In case of need, please refer to a qualified electrician.
CLEANING AND MAINTENANCE
Problem
Possible solution
The appliance doesn’t turn on
Check the fuse conditions.
If it is necessary, replace it with another
one with the same characteristics.
The appliance overheated (cut-off
protection).
Wait at least 15 minutes, then try to turn it
back on.
The flame effect doesn’t turn on
Defective Led light.
Have the appliance checked by a qualified
electrician.