ohmex HET 4530 COLOR, Инструкция по эксплуатации, Страница: 115 / 120

111
EN
HET 4530 COLOR
USE
- View settings
1. Press the “ TIMER SET ” button
2. Press “+” or “-” to check timer start times one by one.
3. Press the “ ” button to check the stop time.
4. Press “+” or “-” to continue viewing.
5. To delete the current setting, press “C ” to cancel.
- Timer settings
A Select the serial number
1. Press the “ TIMER SET ” button; the serial number flashes.
2. Press “+” or “-” to change the serial number and select the one pertinent to the
model.
B Select the date
1. Press the “ TIMER SET ” button again; the cursor on the left side of the day flashes.
2. Press the “ ” or “ ” buttons to move the cursor to the corresponding day.
3. Press “+” to add the corresponding day or press “-” to delete the day until all the
selection is completed with all dates.
C Start time settings
1. Press the “ TIMER SET ” button; the hour flashes
2. Press “+” or “-” to set the hour
3. Press the “ TIMER SET ” button; the minutes flashes
4. Press “+” or “-” to set the minutes
D Stop time settings
1. Press the “ TIMER SET ” button, the display is off and the hour flashes.
2. Press “+” or “-” to set the hour.
3. Press the “ TIMER SET ” button; the minutes flashes.
4. Press “+” or “-” to set the minutes.
E Temperature settings
1. Press the “ TIMER SET ” button; the set temperature starts to flash.
Now the displayed temperature is the default or previously set temperature. The
temperature can be set by pressing “+” or “-”.
F
Press the “
TIMER SET
” button to continue settings and then press “OK” to complete
and save settings.