OHM ELECTRIC COOL CABI OCA-H300BC-AW2, Инструкция по эксплуатации

Страница: 31 / 88

31
1. Safety precautions
⚫ This product is an industrial cooling unit for control panel. Do not use it for any other purposes.
⚫ Be sure to read these precautions carefully before starting operation for proper use.
⚫ All the warnings and cautions described herein must be observed in order to use the product safely.
The marks and their meaning shown in this manual are as follows.
Danger
Improper handling is likely to lead
to death or serious bodily injury
Warning
Improper handling can create a
hazardous situation which will
result in death or serious injury
Caution
Improper handling is likely to lead
to bodily injury and or property
damage
Danger
Never touch the terminal board while the cooling unit is energized.
Caution
Never remove the front cover of the unit during operation. Do not put your fingers or foreign matters into
the rotating part of fan.
Always disconnect power and wait until the fans stop completely before starting work.
→ ailure to this can result in injury.
This product is for indoor use only.
This product should not be used in a place where inflammable gas, corrosive gas, oil fumes or dust which
may affect insulation are contained in the air.
→
ailure to this may shorten the product life or cause product failure.
Shocks and vibrations should be strictly avoided at the site of use.
Do not use or store this product in a place where any source of flame or sparks exists.
Alteration or repairing of this product including recharging of refrigerant is prohibited.
Please contact us or your local supplier for repairing service.
Use and maintenance of the cooling unit should be done by he designated personnel with specialized
knowledge.
Keep upright position during transportation without tilt.
Never transport it without dismounting from a control panel.
Use this product within the temperature range from +
℃
to +5
℃
and humidity not exceeding 85%RH
with no condensation.
Never place the cooling unit sideways or upside-down during storage.
Storage condition should be kept within the temperature range from
℃
to +6
℃
and humidity not
exceeding 85%RH with no condensation.
Make sure that the package is not damaged on delivery of the product.
→ Any packaging damage may be a cause of product failure. Do not use a damaged product.
Should the refrigerant piping be damaged, place the cooling unit in an open space away from fire or
possible ignition sources such as electric components.
→ There is a slight risk of combustion.
This product is designed exclusively for industrial use and not for general use.
It should be used only by persons having specialized knowledge.
Means “Strict prohibition”
Means “Obligatory action”
This is for calling attention
This is to draw attention for
“Rotating body”
This is to draw attention for
“Electrical shock”
This is draw attention for
“Risk of fire”