Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To find the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
SETUP DATA
SPRING
RECOMMENDATION
Part no. MI_FKA108_0
Issued 2015-04-24
Compression
15
clicks
Rebound
12
clicks
Spring preload
0
mm/turns
Oil level
140
mm
Fork leg position
13
mm
Öhlins front fork fluid
01309-
Part No.
Spring rate N/mm
08427-55
5.5
Recommended
08427-60
6.0
2.13
Install the front fork legs into the triple clamps
at the recommended Fork leg position
according to Setup data. Tighten according to
the recommendations in the vehicle service
manual.
Notee!
1
Measure the fork leg position from the upper
triple clamp to the top of the outer tube.
2.14
Install all removed parts in the same positions
as they were before the installation. See the
vehicle service manual for correct procedure
and torque specifications.
2.13