Ohlins TTX25, Руководство по ремонту, Страница: 12 / 16

12 13
4.3.9
Use tool 00727-02. Fasten the Shaft in a vice near the Piston holder
end of the Shaft.
4.3.10
Use a 14 mm long socket to mount the Piston holder on the Shaft.
Tightening torque 15 Nm
Loctite 243
4.3.11
Use a 14 mm socket to mount the Piston, Shims, settings parts and
nut.
note!
Make sure to mount the parts in the same orientation and order of the
parts as they were at removal.
Tightening torque 7 Nm
Loctite 243
4.3.12
Connect the Top out spring onto the Piston holder. You will hear a
noticeable click.
4.3.13
Mount the Piston ring on the Piston.
4 aSSeMBle cartridge
4.3.9 4.3.10
4.3.11
4.4.1
4.4.2
4.3.12
4.4 Mount Shaft
4.4.1
Use tool 00727-09. Fasten the Cylinder tube assembly in a vice in
an upright position, approximately 100mm from the top.
4.4.2
Use Assembly lubricant on the Seal head thread and O-ring. Use
tool 01797-07 to install the Shaft assembly in the Cylinder tube
assembly.
Tightening torque 20 Nm
4.3.13
approx 100 mm