background image

This is the safety alert symbol.  It is used to alert you to 

potential personal injury hazards.  Obey all safety messages 

that follow this symbol to avoid possible injury or death.

Read and understand all safety rules and operating instructions before using this 

tractor attachment.

Follow all safety rules and operating instructions provided by your vehicle's 

manufacturer when using attachment.

Before filling hopper, become familiar with the operation of this Spreader.

Never allow children or untrained persons to operate vehicle or attachment.

Never use attachment near other persons to avoid personal injury.

Do not exceed the vehicle manufacturer's towed weight limit.

Reduce vehicle speed and allow extra stopping distance when towing heavy 

loads.

Reduce vehicle speed and towed weight when operating on slopes.

Operate up and down slopes, never across the face of slopes.

Avoid sudden turns or maneuvers.

Do not tow attachment on public roadways.

Do not remove warning decals from product.

Check product for worn, loose, or damaged parts before each use.  If any damage 

is present, repair the product before using.

Check product for loose or missing fasteners before each use.  Tighten or replace 

fasteners as needed before using.

Do not exceed vehicle speed of 3 miles per hour when towing attachment.

Do not exceed attachments rated weight capacity of 80 pounds.

1

Safety Rules

Содержание 80TBS











Отзывы: