Software Settings
35
Security
The security mode is turned off by default but can be enabled at any time. Click on the check
box, and a message will appear to make sure it is intentional that the security function is being
turned on.
If the Security feature was used in this database at any time in the past, then Administrator(s)
will already exist. If this is the case, make sure the administrator credentials have been recorded
and are accessible. If no Administrator was ever created, the operator will be given an option to
create a login.
After the login is created, the user immediately will be required to log in to use the software.
Once Security is turned on, and an Administrator is logged in, the Administrator can then add
other Operators and/or Administrators.
Administrator vs. Operator
When Security is activated, to gain access to the software, a person will need login credentials.
These credentials either will be assigned to Operator or Administrator status.
o
Operator status allows a person to log into OHD Logic and run tests, reports, add people
and all the regular functions of a fit testing program.
o
Administrators are unique from Operators in that Administrators can gain access to all the
setup items.
If the password is lost or forgotten and nobody can gain access to the software or to the
Settings functions, OHD must be contacted, +1-205-980-0180, option 4, or
The person requesting login information must be able to prove that they have authority to
control the software (as determined by OHD's tech support team). OHD claims no liability as to
the privacy of a customer's data.
Содержание QuantiFit 2
Страница 53: ...Appendix D CNP Diagram 52...
Страница 108: ...Appendix D CNP Diagram 52...
