OHAUS VE1500P, Руководство пользователя

Страница: 4 / 36

EN-2 Defender Series Base
2.3 Connecting an Indicator
Certain U-Pallet Scale systems will have an Indicator already attached to the cable end. If the Indicator is not attached or if
the Indicator is purchased separately follow the steps listed below to make the proper connections.
1. Route the cable to the position where the Indicator will be mounted.
2. Consult the installation instructions of the Indicator to properly attach the cable connections inside the Indicator.
3. The Signal names of the U-Pallet Scale wires are shown in Table, U-Pallet Scale Wiring Color Code.
CAUTION: Ensure that the cable is protected against possible damage when routed to the Indicator.
3. OPERATION
Operating Limits
MAXIMUM ADMISSIBLE LOADING.
Model
Maximum Central
load
1
Maximum Side load
2
One Side Corner Load
3
VE1500P
2250 kg
NOT
RECOMMENDED
NOT RECOMMENDED
VE1500PW 2250 kg
NOT
RECOMMENDED
NOT RECOMMENDED
The VE Series U-Pallet Scale is designed for an evenly distributed load of 1500 kg
For continued best operating performance:
Avoid falling loads, shocks and hard lateral impacts
When weighing, all items should be centrally located on the U-Pallet scale frame.
The forks of a pallet truck, crane or forklift must not be touching the scale during
weighing.
Never move the scale when weighing
Verify the calibration of the U-Pallet scale system at regular intervals.
U-PALLET SCALE WIRING COLOR CODE
Indicator Signal Name U-Pallet Scale Wire Color
EXC+ (IN+) Green
SEN+ Yellow
SIG+ (OUT+) White
SIG- (OUT-) Red
SEN- Blue
EXC- (IN-) Black
Shield (GND) Yellow/Green