Quick Start Guide
Scout
SPX Balances
Ohaus Corporation www.ohaus.com
iii
Scout
SPX Balances
Button
Short Press
Zero/On
Turns the
balance on;
If balance is
On, sets Zero
Initiates print
Function
Initiates an
application
mode
Tare
Tare
Long Press
Off
Turns the
balance Off
Units
Changes the
weighing unit
Mode
Changes the
application
mode
Menu
Enters the
User menu
Short Press
(Menu
Function)
Yes
Accepts the
current setting
No
Advances to
the next menu
or setting
Back
Moves to
previous
menu item
Exit
Exits the User
menu
CALIBRATION
When the balance is operated for the first time, a span calibration is
recommended to ensure accurate weighing results. With balance turned on:
Step-1
Press and hold
Menu
until [
mMeNU
] (Menu) is displayed.
Step-2
Release the button, the display will show [
C.A.L
].
Step-3
Press
Yes
to accept. [
SpaN
] will then be shown.
Step-4
Press
Yes
to begin the span calibration. Zero reading is stored
automatically.
Step-5
Place the specified span calibration mass or press
No
to select an
alternate weight.
[
--C--
] will be displayed while the reading is stored
The display will show [
done
] if the calibration was successful. The balance
returns to the previous application mode and is ready for use.
OPERATION & APPLICATIONS
The balance can be configured to operate in various Application modes. Press
and hold
Mode
key to select your Application mode.
The Scout SPX balance incorporates the following Applications:
[
wWEIGH
]
[
Count
]
[
Percnt
]
[
CHECk
]
[
total
]
[
Hold
]
Weighing
Parts
Counting
Percent
Weighing
Check
Weighing
Totalization
Display
Hold
