OHAUS MB23 Скачать руководство пользователя страница 11

MB23 / MB25                                                                                                     EN-9 

 

RS:2400,7,N,2,X 

Change RS232 setting (The current RS232 setting can be displayed on the LCD by pressing 

Print

 for 2 seconds while in standby mode.) 

Baud:1200,

2400

,4800,9600,19200 

Data Bits: 

7

 or 8 

Parity: 

N

 = none, O = odd, E = even 

Stop Bits: 1 or 

2

 

Handshake: 

X

 = xon/xoff (software), R = RTS-CTS (hardware), N = none 

 

The Analyzer will return “ES” for invalid commands. 
All communication uses standard ASCII format. 
Sent commands must terminate with a Line Feed or Carriage Return Line Feed (CRLF). 

 
RS232 Output 

^^^^^^^^^^^^^^^^^^^^^^^^

 

 
MOISTURE DETERMINATION 
OHAUS MB2x SN ######### 
Switchoff Mode  TIMED 10:00 
Drying Temp 

100C 

Result Units 

%Moisture 

 
00:10 0.0%MC 
00:20 0.0%MC 
 
Elapsed Time 

00:02:21 

Initial Weight 

8.560 g 

Final Weigh 

8.555 g 

Final Result 

0.0%MC 

 
Header on 
Header on 
Header on 
Header on 
Header on 
 
If 

Print

 pressed or print interval set. 

If 

Print

 pressed or print interval set. 

 
Printed at successful end of test. 
Printed at successful end of test. 
Printed at successful end of test. 
Printed at successful end of test. 

^^^^^^^^^^^^^^^^^^^^^^^^

 

 

Compliance 

Compliance to the following standards is indicated by the corresponding mark on the product. 

Marking Standard 

 

This product conforms to the EMC directive 2004/108/EC and the Low Voltage Directive 2006/95/EC. 
The complete Declaration of Conformity is available from Ohaus Corporation 

 

AS/NZS4251.1 Emission, AS/NZS4252.1 Immunity 

 

CAN/CSA-C22.2 No. 61010-1-04; UL Std. No. 61010A-1 

 

 

Disposal 

In conformance with the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) 
this device may not be disposed of in domestic waste. This also applies to countries outside the EU, per their 
specific requirements. 
 
Please dispose of this product in accordance with local regulations at the collecting point specified for electrical 
and electronic equipment. 
 
If you have any questions, please contact the responsible authority or the distributor from which you purchased 
this device. 
 
Should this device be passed on to other parties (for private or professional use), the content of this regulation 
must also be related. 
 
Thank you for your contribution to environmental protection. 
 
For disposal instructions in Europe, refer to www.ohaus.com/weee. 

Содержание MB23























































Отзывы: