Sapphire JS10 and JS500 EN-5
Stability Indicator
Balance Display
Low Battery Indicator
OPERATION
Turning the Balance ON
Press
On
.
.
.
.
. All segments will appear briefly followed by a software revision
number and then
g
. Allow 5 minutes warm-up time.
Turning the Balance OFF
To turn the balance OFF, press and hold
Off
until the display indicates
, then
release.
Weighing
1. If it is necessary to rezero the display, momentarily press
O/T
.
2. Place item(s) to be weighed on the pan and read the weight on the
display. The stability indicator appears when the reading is stable.
Taring
When weighing items that must be held in a container, taring subtracts the
container's weight from the total weight on the pan.
1. With an empty container on the pan, press
O/T
to zero the display.
2. As material is added to the container, the net weight is displayed. Tared
weight remains in balance memory until
O/T
is pressed again.
Parts Counting
Parts counting must be turned ON before using this procedure. Refer to Activating
Units. The balance will count parts based on the weight of a reference sample of
5, 10, 20 or 50 parts. For optimum results, the parts should be uniform in
weight.
Unit Indicators
*
BAT
pct
ozt
dwt
g
2 Text new.pmd
6/10/2004, 9:53 AM
5
Содержание JS500
Страница 2: ...1 cover new pmd 6 10 2004 9 53 AM 2 ...
