EN-6
Sapphire JS10 and JS500
Parts Counting (Cont.)
1. Start with the balance ON in a weighing mode.
2. Place a container on the pan and press
O/T
to tare it.
3. Press
On
until
is displayed. When
On
is released,
pc
, or
pc
,
pc
,
pc
is displayed depending on what was last entered.
4. Repeatedly press
Mode
to change the reference sample to either 5, 10, 20,
50 parts.
5. Add the selected reference number of parts to the container, then press
On
.
The display shows the number of parts added.
6. Add parts to be counted and read the quantity on the balance display.
7. To read the weight of the parts, press Mode to change to any of the
activated weighing units.
8. To return to a weighing mode, press
Mode
to select a weighing unit, the
display indicates the weight of the container as a negative value. Simply
press
O/T
to tare the balance. Taring the balance does not affect the
sample weight which is stored and retained as long as the balance
remains on.
9. You can return to parts counting at any time by repeatedly pressing
Mode
until the parts counting indicator is displayed. To count similar parts, place
a container on the pan and press
O/T
, then place parts in the container.
The balance displays the number of parts.
CALIBRATION
Calibration masses are available for checking and calibrating the balance.
Balance
Required Calibration Masses
JS10
10g Included
JS500
200g Included
2 Text new.pmd
6/10/2004, 9:53 AM
6
Содержание JS500
Страница 2: ...1 cover new pmd 6 10 2004 9 53 AM 2 ...
