E
XPLORER
®
E
XPLORER
®
Quick Start Guide
Quick Start Guide
Ohaus Corporation
ii
iii
www.ohaus.com
1
ASSEMBLY INSTRUCTIONS
(More details, see page 7 of instruction manual)
1.1
Pan Installation
1.2
Side Door Installation
1.2.1
Unlock
1.2.2
Align
1.2.3
Clear
1.2.4
Lock
1.3
Front Panel Installation
1.3.1
Release
terminal
1.3.2
Align
panel
1.3.3
Push to
rear
1.3.4
Reconnect
terminal
1.4
Top Door Installation
1.4.1
Align
1.4.2
Press Down
2
ASSEMBLY INSTRUCTIONS
(More details, see page 9 of instruction manual)
3
SELECTING THE LOCATION
Avoid excessive vibrations, heat sources, air current, or rapid temperature changes.
4
POWERING AND LEVELING THE BALANCE
Connect the AC
Adapter to the wall
outlet. Connect the
plug into the
receptacle on the
rear of the balance.
For best accuracy, allow the balance to warm up for
60 minutes.
To level the balance,
adjust thumbwheels until
level is centered. See the
Level Assist screen in the
Information Menu.
5
SAFETY PRECAUTIONS
For safe and dependable operation, please comply with the following safety precautions:
•
Input voltage printed on AC Adapter and plug type must match local AC power supply.
•
Make sure power cord does not pose an obstacle or tripping hazard.
•
Disconnect product from power supply when cleaning.
•
Do not operate product in hazardous or unstable environments.
•
Do not drop loads on platform.
•
Use only approved accessories and peripherals, as available.
•
Operate product only under ambient conditions specified in Instruction Manual.
•
Service should be performed by authorized personnel only.
