EN-8 EB SERIES
NOTES
:
• If only a Hi value was set (Lo value is “0”), the check-alarm will activate
and display “OK” above this value. If only a Lo value was set (Hi value is
“0”), the check-alarm will activate and display “OK” below this value.
• Weight must be more than 20 scale divisions for Check-Weighing/Counting
to operate.
• Hi-Lo values are retained when the unit is turned off.
• Separate Hi-Lo values for check-weighing and counting (pcs) may be
entered.
• To clear the Hi-Lo values, press
Clear
then
Enter
as the values are
displayed. This effectively exits from Check-Weighing/Counting Mode also.
4.6 Sampling, Calculating Average Piece Weight (APW)
Counting Mode is indicated by “
pcs
” or “
pc
” on the display.
Place the desired sample onto the weighing pan (or into a
tared container) (ex. 500g).
Press
COUNT
to initiate sampling. “SP 10” (or last sample
sized used) will be displayed, then press
Enter.
“------“ will be
displayed momentarily before the sample size piece count is
displayed.
NOTES
:
• To change the sample size, press successively to display: “SP 20”,
“SP 50”, “SP 100”, “SP 200”, “SP 500”, “SP 1000”. Press
Enter
to select
the displayed sample size.
• APW values are not retained when the unit is turned off.
• To exit from Counting Mode and clear the APW, press
COUNT
.
