OHAUS Discovery Balances, Инструкция по эксплуатации

Страница: 44 / 52

EN-40 Ohaus Discovery
3.8 Sealing Access to the Balance Settings
When used in conjunction with the Lockout menu, the balance may be sealed to prevent or detect unauthorized changes to the balance settings.
For legal for trade applications, the balance must be sealed to prevent access to the metrological parameters.
To seal the balance, cover the Lock switch access hole at the rear of the balance. A paper seal may be installed as shown.
NOTE : Consult local Weights and measures official to determine sealing method requirements.
To regain access to the locked balance settings, break the seal and power up the balance. When OHAUS appears on the display, press and
hold the recessed Lock Switch until a weight is displayed.
Sealing the Balance
Lock Switch
Access Location
Rear of Balance
3.9 Printing Data
Printing data to an external computer or printer requires that the communication parameters in the RS232 sub-menu be set to match external
device communication parameters.
04/01/06 12:30 PM // if GLP SET> Time is ON
Bal ID 1234567 // If GLP SET> Balance ID is ON
USER ID ABCDEFGHIJ // If GLP SET> User ID is ON
PROJ ID 1234567890 // If GLP SET> Proj ID is ON
Name....................... // If GLP SET > Name is ON
// If a tare value is entered, these three items are printed if selected in the definitiion string.
0.0200kg G // Gross ON - G, B or [space] as determined in Readout sub-menu.
0.0200kg T // Tare ON
0.0000kg NET // Net ON
// Otherwise, gross is printed if selected in the definition string.
0.0200kg G // Gross ON - G, B or [space] as determined in Readout sub-menu.
Paper Seal
80104130.indd Sec1:40 2011/11/25 9:08:41