EN-36 Defender 5000 Indicators
4.2 Counting
Use this application to count samples of uniform weight.
Press
the
button
until
the
icon
corresponding to
Counting
is displayed in the
screen.
The default (or last) Average Piece Weight (APW) is
displayed.
Set the APW value according to section 4.2.1 and
then place objects on the pan to display the number
of pieces.
4.2.1 Set the Average Piece Weight (APW)
Note:
It is recommended that the APW is larger than 1d. If APW is between 0.05d and 1d, a warning
message will be displayed and the information line will show ‘APW is too small!'. If APW is less than
0.05d, an error message will appear and the APW value cannot be stored.
There are two methods to set the APW:
1. Entering a Known APW
Method 1
Key in the Piece Weight using the alphanumerical
keypad.
Then press the Softkey corresponding to the icon
.
Method 2
Alternatively, first press the Softkey corresponding
to the icon
to enter the sub-menu for
setting the APW.
Press the Softkey corresponding to the icon
to
edit the APW value using the alphanumerical
keypad.
After editing, press the Softkey corresponding to
the icon
for confirmation, and then press the
Softkey corresponding to the icon
to exit the
sub-menu.
Содержание Defender 5000 Series
Страница 2: ......
Страница 65: ...Defender 5000 Indicators EN 63 9 3 Drawings and Dimensions TD52P TD52XW...
