OHAUS Defender 5000 Series, Инструкция по эксплуатации

Страница: 37 / 73

Defender 5000 Indicators EN-35
4.1.5 Input/Output (I/O) Setup
The I/O’s setup can be customized for various user preferences.
The I/O’s setup is defined below (defaults in
Bold ).
Item Available Settings
Enable On, Off
Discrete Input 1 Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input 2 Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output 1 Off, Overload, Underload
Discrete Output 2 Off , Overload, Underload
Discrete Output 3 Off , Overload, Underload
Discrete Output 4 Off, Overload, Underload
Note:
The I/O’s will only work when the I/O Option Board has been installed. See the Accessory list
in section 9.4 for information.
The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs
which can be used for simple process weighing.
Press the button to enter the Main Menu.
With the button corresponding to the icon , go
down the list and highlight Application Mode .
Enter this sub-menu by pressing the button
corresponding to the icon
.
In the Application Mode menu enter the Weighing
sub-menu.
The Weighing sub-menu is now displayed.
Select the list item and press the button
corresponding to the icon
to change the
setting as desired. After completion of I/O’s
setup, press the Softkey corresponding to the
icon
to return to the main application
screen.