OHAUS Dafender 3000 i-DT33P, Инструкция по эксплуатации, Страница: 41 / 60

Defender 3000 Indicators EN-39
Connect the indicator to OHAUS ScaleMate software on a PC via the RS232 (or USB or Ethernet optional
ports). To customize print template, you need to go to the ScaleMate software, Select
Print Template on
the top bar, and then double click items in the left column to select which ones you want to put in your print
template.
Note : Contact an authorized OHAUS dealer to obtain the ScaleMate software and learn more about the
software's other functions.
Alternatively, you can also input the index number of the print items in the middle column directly to
customize your print template in the software, using
$[XXXX]! format. XXXX refers to the index number of
each print item. Please check the following table for each item's index number.
Index Number Print Items
5000 Result
5001 Gross
5002 Net
5003 Tare
5004 Displayed Weight
5005 Displayed Digit
5300
Mode
5301 Information (APW value in Counting;
Under and Over Value in Check;
Totalization result in Total)
5403
Indicator's Serial Number
5900
New Line
5901 End of Template
5902 Header Line 1
5903 Header Line 2
5904 Header Line 3
5905 Header Line 4
5906 Header Line 5
4.6.3 USB Configuration
Please refer to USB Configuration in the Defender
TM
3000 USB Interface Instruction Manual .
4.6.4 Ethernet Configuration
Please refer to Configuration in the Defender
TM
3000 Ethernet Interface Instruction Manual .