BW Scales
Quick Start Guide
BW Compact Bench Scales
Quick Start Guide
iv
Ohaus Corporation www.ohaus.com
Accessing the User Setup Mode
With the scale off, press
ON/OFF
and
ZERO
simultaneously.
When the scale turns on, release
ON/OFF
but keep pressing
ZERO
until
SETUP
appears
To navigate in the User Setup Mode, press:
to accept the displayed setting
to end setup and proceed to “Save”
to toggle through available settings
to revert to the previous parameter
User Setup Parameters
Parameters Description
Settings
S1
Scale automatically turns off
after 15 minutes of inactivity.
ON
- enables this function.
OFF
-disables this function.
S2
Scale enters sleep mode after
two minutes of inactivity.
ON
- enables this function.
OFF -disables this function.
S3
CHECK activation and
Alert Range
0
- Check mode is off.
Scale beeps when displayed weight is:
1–…within the preset Over and Under values
2–…outside the preset Over and Under range
3–…within the preset Over and Under values
(Over-Under LED’s do not light within preset range)
4–…outside the pre-set Over and Under range
(Over-Under LEDs do not light within preset range)
5– Alarm is off
(Over-Under LED’s do not light within preset range)
6– Alarm is off
S4
Averaging Level
0, 1,
2
, 3 (most filtering, longer stabilization time)
4, 5, 6, 7 (corresponds to 0, 1, 2, 3 but with slower
display update)
S5
Weighing Unit
Lb
, oz, g
S6
LED Brightness Level
0
,1,2,3 (dimmest).
DSP
Display Type
OFF
– displays weight continuously.
ON – displays first stable weight.
S8
Resolution
OFF
– 3000 scale divisions
ON – 6000/7500 scale divisions
Save
Save or Abort
Save
– saves changes and reverts to weighing mode.
Abort – reverts to weighing mode without saving
changes.
Note:
Bold settings are defaults.
*
8025
3134
*
P/N 80253134
