Quick Start Guide
BW Scales
Ohaus Corporation www.ohaus.com
iii
BW Compact Bench Scales
Quick Start Guide
OPERATION
Turning Scale On/Off
Press
ON
. After a display test, scale enters active weighing mode.
Allow 15-30 minutes for warmup.
To turn the scale off, long-press
Off
.
Zero Operation
Press
ZERO
to zero the stable weight display.
(Weight must be within ±2% of
scale capacity). Center of Zero indicator lights up.
Manual Tare
Place a container on the weighing pan and press
TARE
.
Display shows net value of “
0
”.
To clear Tare value, press
TARE
with pan empty.
9
0
TARE
No
Checkweigh Target Setting
Compares the weight of an item against a pre-set Over-Under range.
To activate Checkweighing Mode, see Menu –
next page
.
• Press
CHECK
to enter Over-Under parameters.
• Value of “OVER” target appears first, with active digit flashing. (
OVER
LED is lit.)
Press
No
to increment the active digit or
CHECK
to shift to the next digit.
• Press
Yes
to accept the displayed value and proceed to “UNDER” target.
Now the
UNDER
LED is lit.
9
0
TARE
No
• Press
No
to increment the active digit or
CHECK
to shift to the next digit.
• Press
Exit
to accept displayed value and exit into checkweighing mode.
Notes
:
•
OVER
or
UNDER
LEDs light if weight on pan is over or under the pre-set limits.
•
OVER
and
UNDER
LEDs light simultaneously if weight is
within
pre-set limits.
• The LED indication is complemented by a beep.
• Over-Under values are retained when the unit is turned off.
• Over-Under values are not retained when the weighing unit or resolution setup are changed.
