OHAUS a-AB33EC, Инструкция по эксплуатации

Страница: 24 / 152

EN-22 Analyzer and Bench Meter
6.2.2 Change password
1. Touch on the screen.
2. Press the or button to select between different user IDs. Touch
when you see the ID number you want to change password for.
3. Enter the old password. If the old password is correct, the meter will require you to
enter a new password.
Note
：

Please refer to the above
Switch between different users
section for how to
enter password.

If the password is wrong, the meter will require you to re-enter.
4. Then enter the same new password again to confirm. If the modification is
successful, you will see 'Modify Password - Successful' on the screen.
Note
: If you enter the new password differently for the two times, the meter will
require you to re-enter the new password.
7. Records management
The meter/analyzer can record 1000 sets of measurement results from 0 to 999.
If the record is full, the oldest record will be automatically overwritten.
To enter records management:
1. Touch
on the screen, and then press the or button to view each
record.
2. Touch on the screen to print the record if you connect the meter/analyzer to
a printer or a computer.
3. Touch again to exit and return to the measurement screen.
Please check the following table for the total number of measurement and calibration
records each model supports.
Table 7-1 Records management
Model
Maximum Measurement
Records
Maximum Calibration Records
AB33PH 1000
1 pH calibration result and 1 ORP calibration
result
AB33EC 1000 1 conductivity calibration result
AB33M1 1000
1 pH calibration result, 1 ORP calibration
result and 1 conductivity calibration result
AB41PH 1000 10 pH calibration and ORP calibration results
Note
: The calibration records are separate and not included in the 1000 sets of
measurement records.