How to assemble the saddle (seat) & seatpost
1. Remove the seatpost wrapping.
2. Loosen the seat post quick release(3).
3. Insert the seat post(2) to the desired height before securing it in place with the quick release (3).
4. For safety assurance, tighten the saddle bolt to 22Nm with a torque wrench before you ride.
WARNING
: Do not slide the saddle all the way back on the rails. Specifically, be sure to leave a
minimum of 1cm spacing from the edge of the seatpost clamp to the beginning of the bend in the
saddle rails. In addition, do not raise the seatpost (2) above the “minimum insert” line clearly
printed on the backside of the seatpost (2).
14
