INSTRUCTION MANUAL
3
GENERAL CAUTION FOR CURTAIN MACHINE
•
CURTAIN machine is designed to create a perfect curtain of confetti or snow paper. Any
other use different from the written, excludes Oh!FX (CONFETTISHOTS SLU) of liability
and warranty
• It is essential that the machine is perfectly fixed, and reinforced with a safety cable.
• Use only the consumables intended for that specific use, and duly certified.
•
In case of malfunction, do not attempt to disassemble the machine and contact the
distributor or manufacturer. Any manipulation may exclude the warranty
•
Do not wet the machine. To clean it, use a damp cloth and dry it immediately.
• Only one adult and qualified person must manipulate the machine.
3. Check that the machine is level. CURTAIN machine has a bubble level (7) at the top.
Correct the fixation of the machine if necessary. The machine must be perfectly level.
4. Connect a Powercon-Schuko cable (not included) to the power Input (4) of the machine. If
you want to use several machines simultaneously, simply link them by using a Powercon
cable male-female connected on the Power output connector (5) of the 1st machine.
5. Filling the machine: Close the adjustable output windows (2) so that the confetti or snow
paper doesn’t fall down when filling the machine. Remove the lid of the opening for loading
(3) and fill the Octagon structure (1) with the desired confetti or snow paper. Leave enough
room so that the confetti inside can move freely through the interior of the octagon structure.
Never squeeze or compress the confetti inside the machine. It must be loose. Cover again
the opening for loading (3) and tighten with the small screws.
6.
Open more or less the adjustable output windows (2) and check if the intensity of the
rainfall is the desired or it’s too weak. Adjust the output windows according to the desired
intensity or amount of confetti falling down.
7. CURTAIN machine will be activated as soon as it receives electricity current. You can
use different control systems to activate the machine (eg: 1 CHANNEL FX PUSHER, 1
CHANNEL DMX SWITCH, etc.). You can also regulate the intensity by using a dimmer to
the input current of the machine. The led indicator (6) will light up when the machine is in
operation.
