Oglo# SB120, Руководство пользователя

Страница: 27 / 76

To ensure your device is automatically detected the next time it is switched
on, please do not interrupt the pairing procedure.
When the speaker is switched off and switched back on, it automatically tries to
reconnect with the connected source.
USING THE SPEAKER BUTTONS
Your portable speaker can control the audio source connected via Bluetooth* (if it
is AVRCP compatible), using the buttons on top of the device. These buttons are
not enabled when you use the auxiliary input.
• Press the button briefly to pause or resume playback.
• Press the button to access the next track.
• Press and hold the button for 3 seconds to access the previous
track.
INCOMING CALL DETECTION
• When a call is received or dialled, the smartphone pauses music playback. The
transmission of music from your phone to the speaker is interrupted.
• When the call ends, the phone resumes playback from the point where it was
interrupted, and plays the music back through the speaker’s loudspeakers.
DISCONNECTING THE SPEAKER
If you wish to disconnect your speaker to pair it to a new audio source, press and
hold the button
for 3 seconds. Then begin the pairing procedure again with
the audio source you wish to use.
27
EN
27