- -
- 23 -
9.3 Tuning Procedure
Note: Before starting the tuning measurements, make a copy of the tuning sheet on the
following
page.
1. Install the beige LC Offset Tuning Connector into test port of the adjustable section (small
end) of Tuning Index Tool.
2. Install jumper or BTW connector to be tuned into the test port of the fixed section (large end)
of Tuning Index Tool.
3. Make insertion loss measurement and record in the appropriate column on copied tuning
sheet.
Note: It is not necessary to remove the tuning jumper or the jumper/BTW connector from
the Tuning Index Tool until Step 10.
Jumper or BTW
connector to be
tuned
Fixed section
(large end)
