Ofna Racing 1/8 SCALE OFF-ROAD BUGGY, Инструкция по эксплуатации

Страница: 26 / 36

10300
Alum.
Stopper
ASSEMBLY OF THE BRAKE LINKAGE INTO
BRAKE ROD
*use the screw
provided With your radio.
USING BREAK ADJUST NUT
3X3mm
Set Screw
5mm
Fuel
Tube
5mm
Fuel
Tube
Brake
Idle
Position
Full Throttle
* Align throttle servo same
as shown.
*Snap On.
Tighten
Less Brake
Loosen
More Brake
Tighten
Loosen
* Tighten or loose the adjuster nut
will change the brake.
ALIGN THROTTLE SERVO AND BRAKE SAME AS SHOWN
Brake is not on
Engine at idle
( Neutral Position )
Brake is on
Brake Adjust Nut
( Braking Position )
Brake is not on
Engine at full throttle
( Full Throttle Position )
Less Brake
More Brake
Tighten
Loose
* Tighten or loose the adjuster nut
will change the brake.
2. Pull down piston, attach pressure top
and shock oil overflow with tissue
paper.
SHOCK ASSEMBLY
FILLING THE SHOCKS WITH OIL
ASSEMBLY OF THE SPRING
1. Pull down piston and pour oil into
shock cylinder. Remove air bubbles
by slowly moving piston up and down.
3. Tighten up shock cap.
*Move Slowly.
*Leave 3mm.
OIL
Oil Seal
32237
7mm R-Ring
* Push 6mm ball joint
into ball end.
2.6 x 5mm
Washer
40069
Black
Shock Spring
40063
Spring Holder
OPTION:
40063 - CNC Alum Spring Holder, Orange
30411
6mm Ball
32033
Pressure Top
40093
Shock Cap
Hard Coated
*
Fit into the groove.
* Assembly 2 pieces of the
shock shaft for front and
rear.
40054
Short Shaft
40055
Short Shaft
* Long shaft
for rear.
down.
UP
* Be careful not to damage shock shaft.
* Short shaft
for front.
Make a PAIR for rear
4. Assembly the dust cover.
* Cut 6mm for front.
40060
2.5mm
Nylon Nut
32235
Shock
Piston
40076
Shock
Cylinder
40077
Shock
Cylinder
32237
1mm
Washer
32237
2mm
Washer
Make a PAIR for front
Fit the O-ring into groove.
49041
Spring
Adjuster,
Orange
49041
Spring
Adjuster,
Orange
J-47C
Spring Adjuster....4
40059
14.7mm
O-Ring
32237
3.5mm
O-Ring
40058
Shock Shaft
Dust Cover
32235
Shock Piston.........4
40059
14.7mm O-Ring....4
32237
1mm Washer.............4
32237
2mm Washer..........4
40060
2.5mm Nylon Nut........4
40056
Shock Plastic
Rod End
40056
Shock Plastic
Rod End
40052 - Front Shock Set
40053 - Rear Shock Set
OPTION:
40069 - Black, Stock, Spring Set
40070 - Green, Soft Set
40071 - Blue, Med. Set
40072 - White, Hard Set
APPLY OIL TO SHOCK BODY
BEFORE INSTALLING COLLAR