OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
12
Appendix
Temperature Units
Use the following procedure to change the units on the temperature controller.
1. Press the page key until the display reads “ACCS / list”.
2. Press the scroll key once. The display should read “codE / 0”.
3. Press the up arrow to change the code to 1. After a few seconds, the
display will read “codeE / PASS”.
4. Press the scroll key once. The display will read “Goto / OPEr”.
5. Press the down arrow once. The display will read “Goto / conF”.
6. Press the scroll key once. The display will read “ConF / 0”.
7. Press the up arrow twice. The display will read “ConF / 2”. After a few
seconds, the display will read “ConF / PASS”.
8. Press the scroll key twice. The display will read “unit / oF”.
9. Press the up or down arrow to select units. Available options: °F, °C, °K,
none.
10. Press the page and scroll keys at the same time. The display will read
“EIit / no”.
11. Press the up arrow key once. The display will read “EIit / yes”. This will
reboot the temperature controller. After the reboot, the display will show
the new units.
Page Scroll