- 4 -
Link procedure:
Step1: Power on the collector ,move the plug to second and third interface.
Step2: Power on the gateway, Press and hold the gateway's "FUN" button, until
lights
illuminate.
Step3: Put the plug on the first and second interface, restart the collector and gateway.
3.
RPM Sensor
Magnetic RPM sensor:
Stick the magnet on the motor’s shaft , fix the
sensor near the magnet ,the sensor and magnet can not over 4mm, the green
light illuminate means the sensor is working, if the green light off, try to
change the magnet to the other side up or let the sensor nearer to the
magnet until see the green light is illuminated.
Connection: Yellow – Vin.(First pin) ; Red -3.3v/vcc (second pin) ;
Black – Gnd. (third pin)
Brushless RPM Sensor
(Please read the paper instruction)
4. Mobile APP
Scan the QR code and download the "RCM Telemetry2.0.Apk", install to mobile device, run the APP.
Connect the mobile Bluetooth
After
the gateway’s Bluetooth light on. Choose appropriate model
mode, difference is background, only plane with altitude.
If your mobile have V1.0 App, please
delete it before installing V2.0 App.
