- 2 -
Instructions:
Step 1:
Scan the QR code and download the "RCM telemetry 2.0.Apk", install to mobile device, run
the App, turn on the App Bluetooth
after
the gateway’s bluetooth light is illuminated .
If your
mobile have V1.0 App, please delete it before installing V2.0 App.
Step 2 :
Install collector/GPS into the RC model, attach sensors to battery/esc/motor. Power
collector and gateway. The collector can be powered by either lipo balance plug or radio box
battery.
Step 3:
Before running ensure all gateway pilot lights are illuminated, the mobile device GPS icon is
bright green and Bluetooth is bright blue.
Note: This device is designed for outdoor use in open areas
. Allow 2 minutes to establish GPS
connection, on cloudy or rainy days allow up to 5 minutes. On excessively cloudy days the device
may fail to fix position. In order to keep Bluetooth signal operational the mobile device must stay
within 10 meters of gateway at all times. The gateway and collector maximum distance is 200
meters.
On fiberglass/ carbon fiber models the collector's antenna must be outside the hull as much as
possible. On plastic models the antenna can operate inside the hull but working range will be
reduced less than 200 meters.
The collector antenna wire can be installed next to the radio receiver wire.
1.
Gateway
Input: 4.5V (AA*3)
Size: 174mm* 69mm* 24mm(± 1mm)
1
2
3
4
5
7
8
6
