Officine Gullo PVS4EM, Инструкция по установке и эксплуатации

Страница: 5 / 12

5
Officine Gullo
SAFETY INSTRUCTIONS
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or
any other appliance.
WARNING:
Improper installation, adjustment,alteration, service or maintenance can
cause property damage, injury or death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this equipment.
To avoid personal injury or property damage, please read and follow these important safety
precautions.
1. Before any maintenance or repairs are performed, disconnect the appliance from the
electric supply.
2. Your appliance should be installed by a qualified installation technician. Have the technician
show you the exact location of the electric supply so you know how to turn off the apliance.
3. On positioning the appliance, ensure that it is perfectly levelled
4. Do not attempt to repair or replace any part of this appliance unless specifically instructed
to do so by this manual. In-warranty service must be performed by an authorized service
agency.
5. If the appliance is placed near a wall or partition, kitchen furniture or decorative coverings,
etc., these must be fire-proof or coated with fire-proofing.
6. Children should not be left alone or unattended in the kitchen while the appliance is in use.
7. It is advisable to place the oven under an extractor hood to ensure rapid elimination of
steam.
8. The ventilation and flue ways of this appliance must remain unobstructed at all times.
9. Do not store items of interest to children above the appliance. Children, as well as adults,
should never be allowed to sit, stand, or climb on any part of the appliance. Serious injury
may occur.
10. Never leave the appliance unattended during use.
11. For your safety, never use your appliance or any other cooking appliance as a space
heater to warm or heat the room.
14. Use only dry potholders. Moist or damp potholders on hot surfaces may result in steam
burns.
15. For a correct installation do not overlap induction elements.