11
Officine Gullo
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct
sprays of water or with high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the ap-
pliance ensures the perfect functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must
be washed with hot water and neutral detergent, then rinsed thoroughly in order to eliminate
all traces of detergent; after which, dried with a dry cloth. Do not use abrasive or corrosive
detergents.
Cleaning the crystal
The crystal must be cleaned with degreasing liquids, acids containing vinegar and lemon,
suitable for cleaning ceramic and crystal. It is advisable to carry out this operation when the
crystal is not completely cold, so that spilled food, burned grease, etc. can be softened using
a damp cloth and removed whilst still warm with an ordinary scraper, in order to avoid
damaging the crystal surface.
Do not use abrasive or corrosive detergents.
CLEANING BURNISHED BRASS SURFACES
No synthetic protective varnishes have been used to obtain the special burnishing effect
on the burnished brass details in order to avoid spoiling the beauty of the brass with an
artificial patina. The antique finish of the surface is the result of natural oxidation that has
simply been accelerated. All the natural antique finish brass surfaces can be cleaned with
any kitchen degreasing detergent, accompanied by the use of an abrasive scouring pad (the
green colored type used for washing dishes). It is recommended that the metal be rubbed,
uniformly applying light pressure, until the desired effect is achieved.
The brass details should then be dried.
Do not use polish as this is suitable for maintaining the gloss but not the antique finish and
could result in an effect that is not compliant with our products. Any spots that may appear
over time on the burnished brass surfaces should be considered as a desirable and particular
characteristic of our craft metal working processes.
CLEANING CHROMIUM-PLATED BRASS SURFACES
No synthetic varnishes have been used to obtain the special polish on the chromium-plated
brass details in order to avoid spoiling the beauty of the chromium plating with an artificial
patina. All the chromium-plated surfaces should be cleaned, where necessary, with a soft,
possibly micro-fiber cloth, combined with metal polishing products, if required. Do not use
abrasive pads.
CLEANING SATIN FINISH NICKEL-PLATED BRASS SURFACES
No synthetic varnishes have been used to obtain the special nickel-plating on the satin
finish nickel-plated brass details in order to avoid spoiling the beauty of the nickel-plated,
Содержание PVS4
