Officine Gullo IIS4, Инструкция по эксплуатации

Страница: 9 / 24

9
DECLARATION OF COMPLIANCE
This appliance is manufactured by OFFICINE GULLO S.r.l
Headquarters and factory
Via Della Torricella 29, Antella, Bagno a Ripoli
50012 Florence - Italy
Tel. +39 055 65 60 3324
+39 055 62 18 07
The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our
sales conditions.
INSTRUCTIONS FOR INSTALLATION
The data plate has all the data necessary for the connection.
LAWS, TECHNICAL RULES AND NORMS
Installation must be carried out observing the following norms:
- Safety prescription in force
- Installation prescription in force.
INSTALLATION
Always comply with the following points during installation:
•
• All electrical installations must comply with local standards. All standards issued by national electrical authorities must
be complied with.
• When circuit breakers are used, they must be suitable for a minimum of 30 mA.
• Avoid obstruction of air intakes or outlets with objects (fabric, walls, etc).
• Keep hot air off of the induction appliance (for example when several appliances are next to one another, or behind
one another, or when an appliance is separated by a separate air duct.
• The induction appliance must not be placed near or on hot surfaces.
•
onto the induction appliance (for example from nearby fryers or hot plates).
• The temperature of input air must be less than +35°C.
• Personnel that use the appliance must ensure that installation, maintenance and checks are carried out only by
Attention!
In accordance with international rules, when connecting the appliance, an automatic device enabling the
disconnection of all contacts from the mains, must be installed above it; this device must have a contacts opening of at
least 3 mm..